Samsung SCX-4116 Manual De Usuario

Descargar
Página de 210
T
ROUBLESHOOTING
8.12
Line Busy
(only for SCX-4216F)
The remote party did not 
answer or the line is 
already engaged.
Try again after a few minutes.
Line Error
(only for SCX-4216F)
Your machine cannot 
connect with the remote 
machine or has lost 
contact because of a 
problem with the phone 
line.
Try again. If the problem persists, 
wait an hour or so for the line to 
clear and try again.
Or, turn the ECM mode on. See the 
Facsimile User’s Guide.
Load Document
You have attempted to set 
up a copy or fax operation 
with no document loaded.
Load a document and try again.
LSU Error
A problem has occurred in 
the LSU (Laser Scanning 
Unit).
Unplug the power cord and plug it 
back in. If the problem persists, 
please call for service.
Memory Full
(only for SCX-4216F)
The memory is full.
Delete unnecessary documents, 
retransmit after more memory 
becomes available or split the 
transmission into more than one 
operation.
No Answer
(only for SCX-4216F)
The remote fax machine 
has not answered after 
several redial attempts.
Try again. Make sure that the 
remote machine is operational.
No Cartridge
The toner cartridge is not 
installed.
Install the toner cartridge. See 
No. Not 
Assigned
(only for SCX-4216F)
The speed dial location 
you tried to use has no 
number assigned to it.
Dial the number manually using the 
number keypad or assign the 
number. See the Facsimile User’s 
Guide.
No Paper
The paper in the paper 
tray has run out.
Load paper in the paper tray. See 
Operation Not 
Assigned
(only for SCX-4216F)
You are doing in the Add/
Cancel operation, but 
there is no jobs waiting.
Check the display to see if there is 
any scheduled job. The display 
should indicate them in Standby 
Mode, for example, Delay Fax.
Display
Meaning
Suggested solutions