Samsung SCX-4116 Manual De Usuario

T

ROUBLESHOOTING

8.26

Message appears on your computer 

screen:
• “Device can't be set to the H/W 

mode you want.”

• “Port is being used by another 

program.”

• “Port is Disabled.
• “Scanner is busy receiving or 

printing data. When the current 

job is completed, try again.”

• “Invalid handle.”
• “Scanning has failed.”

• There may be a copying or printing job in 

progress. When the current job is complete, 

try the job again.

• The Selected port is currently being used. 

Restart your computer and try again.

• The printer cable may be improperly 

connected or the power may be off. You 

must use a parallel cable that supports 

IEEE-1284 bi-directional communications.

• The scanner driver is not installed or an 

operating environment is not set up 

properly.

• Ensure that port is properly connected 

and power is on, Then restart your 

computer.

• Check, The USB cable may be improperly 

connected or the power may be off.

• Do not use the parallel and the USB 

cables at the same time.