Samsung ssn-414w Manual De Usuario

1.

Once the cuff is properly applied and you are seated with  
your feet flat on the floor you are ready to take a  
measurement.

2.

Press the

(Up) or 

(Down)  button  

and you will see a number appear: 1,2, or  
3. These are each of the 3 party memory  
zones explained on page 9 (Special  
Features).

*If you select zone No. 1 your blood pressure will be  

recorded as on of the 40 readings available for that zone.  

The same is true for zones 2 and 3. When taking  
measurements, be sure and select the correct zone  
number so that the measurement is stored in the  

appropriate zone.

3.

Press the START/STOP button. The monitor will begin to  
inflate to the level that's right for you. An upwards facing  
arrow on the digital display indicates the monitor is  
inflating. Remain still and do not talk during the  
measurement process.

4.

You will feel the cuff get tighter around  

your wrist - this is normal. It should not  
inflate to the point of discomfort. If this  
occurs, the cuff may be secured too tightly.  
To  stop the inflation, press START/STOP.  
The cuff will deflate automatically. Rewrap  
the cuff allowing more room between your  
wrist and the cuff.

5.

Inflation will stop automatically to begin  

the measurement process. You will see a  
downward facing arrow and the numbers  
decreasing as the cuff is deflating. You  
will also see a flashing heart to indicate  
the measurement is taking place.

6.

When your measurement is complete the  

monitor will deflate automatically, releasing  
the air pressure in the cuff.

7.

The entire measurement process should  

take less than a minute. Your blood pressure and pulse  
readings are displayed and automatically stored in the  
memory.

18

19

mmHg

mmHg

MODE

Inflation

Deflation

* The monitor will automatically power off after about one minute.