Sony 1500AP Manual De Usuario

42

Playback

Ch
apt
er

 2   

R

e

co
rd

in

g

 a

nd P

la

y

b

a

ck

Proceed as follows to set the current tape position as point A or B for repeat 
playback.

While holding down the SET (YES) button in the menu control section, press 
the g or G button. The time code value of the current tape position is set as point 
A or B, and a message “A set” or “B set” is displayed for 0.5 second in the time 
counter display.
Once set, the point A or B time code value is held in the non-volatile memory 
of the unit until changed. It is not lost when the unit is powered off.

When setting point A or B, you can only use a time code value. Even when 
COUNTER is selected with the COUNTER SELECT button, you cannot use a 
CNT value to set point A or B.

To check the point A or B time code value
Press the g or G button in the menu control section. While the button is held 
down, the point A or B time code value is displayed on the monitor and in the 
time counter display.
If you hold down the g and G buttons simultaneously, the value shown is the 
point B time code value minus the point A time code value. If the point A time 
code value is greater than the point B time code value, a minus sign (

−

) is shown 

before the value.

Buttons used for setting 
the current tape position 
as point B

Buttons used for setting 
the current tape position 
as point A