Sony 4-168-043-14(1) Manual De Usuario

 

 

 

You can enter the frequency of a station 
directly by using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
• Models of area code U2 and CA2:

 

Select 1 

b 0 b 2 b 5

• Models of area code ECE, CEK and 

AU1:

 

Select 1 

b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz
Select 1 

b 3 b 5 b 0

You can also use MEMORY/ENTER on 
the receiver.

If you have tuned in an AM station, adjust the 
direction of the AM loop antenna for optimum 
reception.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 4. If you 
still cannot tune in a station, the frequency is 
not used in your area.

You can change the AM tuning scale to either 
9 kHz or 10 kHz using the buttons on the 
receiver.

Press ?/1 to turn off the 
receiver.

While holding down TUNING 
MODE, press ?/1.

To reset the scale to 10 kHz (or 9 kHz), 
repeat the procedure above.

All preset stations will be erased when you change 
the tuning scale.

?/1

?/1

TUNING MODE