Sony BDV-F500 Manual De Usuario
Se
tting
tting
s an
d A
d
ju
stme
nts
53
GB
[Audio Settings]
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this when outputting HD audio signals to an AV
receiver.
interactive audio and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this when outputting HD audio signals to an AV
receiver.
x [DTS Neo:6]
Simulates multichannel surround sound from 2
channel sources according to the capability of
the connected device, and outputs the sound via
the HDMI OUT jack.
channel sources according to the capability of
the connected device, and outputs the sound via
the HDMI OUT jack.
[Cinema]: Outputs simulated multichannel
sound from 2 channel sources using DTS Neo:6
Cinema mode.
[Music]: Outputs simulated multichannel sound
from 2 channel sources using DTS Neo:6 Music
mode.
[Off]: Outputs sound with its original number of
channels.
sound from 2 channel sources using DTS Neo:6
Cinema mode.
[Music]: Outputs simulated multichannel sound
from 2 channel sources using DTS Neo:6 Music
mode.
[Off]: Outputs sound with its original number of
channels.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
sound track.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
x [Attenuate - AUDIO]
Distortion may occur when you listen to a
component connected to the AUDIO (IN L/R)
jacks. You can prevent distortion by reducing
the input level on the unit.
component connected to the AUDIO (IN L/R)
jacks. You can prevent distortion by reducing
the input level on the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
level is changed.
[Off]: Normal input level.
x [Audio Output]
[Speaker]: Outputs sound from the system’s
speakers only.
[Speaker + HDMI]: Outputs sound from the
system’s speakers and 2-channel linear PCM
signals from the HDMI OUT jack.
[HDMI]: Outputs sound from the HDMI OUT
jack only. Sound format depends on the
connected component.
speakers only.
[Speaker + HDMI]: Outputs sound from the
system’s speakers and 2-channel linear PCM
signals from the HDMI OUT jack.
[HDMI]: Outputs sound from the HDMI OUT
jack only. Sound format depends on the
connected component.
Note
• Even if [HDMI] or [Speaker + HDMI] is selected, the
sound of functions other than “BD/DVD” or
“D.MEDIA” is output from the system’s speakers,
not from the HDMI OUT jack.
“D.MEDIA” is output from the system’s speakers,
not from the HDMI OUT jack.
• When you set [Audio Output] to [HDMI], the
SOUND MODE and “SUR.SETTING” functions are
disabled.
disabled.
• When the System Audio Control function (page 46)
is activated, this setting may change automatically.
x [Sound Effect]
You can set the system’s sound effects (SOUND
MODE and “SUR.SETTING”
MODE and “SUR.SETTING”
)
to on/off.
[On]: Enables all of the system’s sound effects.
The upper limit of sampling frequency is set to
48 kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
The upper limit of sampling frequency is set to
48 kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
Speakers” (page 47).
the speakers. For details, see “Setting the
Speakers” (page 47).