Sony bravia vpl-hw10 Manual De Usuario

Descargar
Página de 80
 
50
Installation Menu
The Installation menu is used for changing the installation settings.
V Keystone
Corrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top (
): 
Sets a lower value (– direction) 
When the top of the trapezoid is longer than the bottom (
): 
Sets a higher value (+ direction).
Depending on the picture position adjusted with the lens shift 
feature, the aspect ratio of the picture may change from the original 
or picture distortion may occur with V Keystone adjustment.
Image Flip
Flips the picture on the screen horizontally and/or vertically. 
Off: 
The picture does not flip.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally. 
V: Flips the picture vertically.
Use this item for installation for the backside projection or ceiling 
installation.
Blanking
This feature allows you to adjust the displayable region within 
the four directions of the screen.
Select each screen edge “Left / Right / Top / Bottom” on the 
Blanking adjustment screen with 
M / m buttons. Adjust the desired 
Blanking value with 
< / , button.
When both the “Blanking” and the “V Keystone” are adjusted at the 
same time, the “Blanking” cannot be adjusted correctly. When using 
the “Blanking”, make sure that you set the “V Keystone” to “0”.
Note
Note