Sony CDX-F7750 Manual De Usuario
11
CDX-F7750S/F7750
2-515-342-21 (1)
H:\Data Disk\2515342211\251534211CDXF7750S\01GB02CD-EUR.fm
masterpage:Right
H:\Data Disk\2515342211\251534211CDXF7750S\01GB02CD-EUR.fm
masterpage:Right
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
and subwoofer volume.
1
Select a source, then press
(SOUND)
repeatedly to select the desired item.
The item changes as follows:
BASS
(bass)
t
TREBLE
(treble)
t
BALANCE
(left-right)
t
FADER
(front-rear)
t
SUB WOOFER
(subwoofer volume)*
*
“
∞
” is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Rotate the volume control dial
repeatedly to adjust the selected item.
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
<
or
,
.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
for different tone ranges.
(With the card remote commander)
1
Select a source, then press
(MENU)
.
2
Press
M
or
m
repeatedly until “EQ7
Tune” appears, then press
(ENTER)
.
3
Press
<
or
,
repeatedly to select the
desired equalizer type, then press
(ENTER)
.
4
Press
<
or
,
repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz
y
157Hz
y
396Hz
y
1.0kHz
y
2.5kHz
y
6.3kHz
y
16kHz
5
Press
M
or
m
repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press
(MENU)
twice.
The setting is complete and the display
returns to normal play/reception mode.
returns to normal play/reception mode.
Adjusting menu items — MENU
You can adjust various menu settings by using
the 4 arrow buttons on the card remote
commander.
the 4 arrow buttons on the card remote
commander.
(With the card remote commander)
1
Press
(MENU)
.
2
Press
M
or
m
repeatedly until the
desired item appears.
3
Press
<
or
,
to select the desired
setting (example: “on” or “off”).
4
Press
(ENTER)
.
The setting is complete and the display
returns to normal play/reception mode.
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
Tip
You can easily switch among categories by pressing
and holding
You can easily switch among categories by pressing
and holding
M
or
m
.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
Setup
Clock Adjust
(Clock Adjust) (page 4)
CT
(Clock Time)
To set “on” or “off” (
z
continue to next page
t
DSPL/PTY
MENU
SCRL
LIST
+
–
ENTER