Sony CMT-EP515 Manual De Usuario

Descargar
Página de 28
Tim
e
r
15
GB
To timer record, you must first preset the radio 
station (see “Presetting radio stations” on 
page 8) a
nd set the clock (see “Setting the clock” 
on page 5)
.
1
2
Press CLOCK/TIMER SET.
3
Press 
./>
 repeatedly until “REC” 
appears, then press CLOCK/TIMER 
SET.
“ON TIME” appears and the hour 
indication flashes.
4
Set the time to start recording.
Press ./> repeatedly to set the hour, 
then press CLOCK/TIMER SET.
The minute indication flashes.
Press ./> repeatedly to set the 
minute, then press CLOCK/TIMER SET.
5
Set the time to stop recording following 
the same procedure as step 4.
The 
REC indicator lights up.
6
Press VOL +/– repeatedly (or turn 
VOLUME on the unit) to adjust the 
volume* for listening to the radio when 
it is activated by the timer.
* This is not affect the recording volume: it only 
adjusts the volume for when the radio turns on 
at the preset time.
7
Load a recordable tape.
8
Press 
z
REC PAUSE/START on the 
unit.
9
Press TAPE 
nN
, if you want to 
switch the direction.
10
Press PLAY MODE/DIRECTION 
repeatedly to select “
g
” to record on 
one side or “
h
” to record on both 
sides.
11
Press 
?/1
 to turn off the system.
Other operations
Notes
• You cannot activate the Daily Timer and recording 
timer at the same time.
• If you use the recording timer and the Sleep Timer at 
the same time, the Sleep Timer has priority.
• Do not operate the system from the time the system 
turns on until the recording starts (about 15 seconds 
before the preset time).
• If the system is on about 15 seconds before the preset 
time, the timer recording will not be activated.
• The volume is reduced to minimum during 
recording.
• If the system is in the recording or recording pause 
mode at the preset time, the timer recording will not 
be made.
• If the system is playing back a tape at the preset time, 
the system will switch to the timer, but the timer 
recording will not be made.
Timer recording radio 
programs
To
Do this
Check or change 
the setting
Turn on the system and then 
start over from step 1 when the 
REC indicator appears.
Activate the timer
Press CLOCK/TIMER 
SELECT repeatedly until 
“REC” appears, then press 
CLOCK/TIMER SET.
Cancel the timer
Press CLOCK/TIMER 
SELECT repeatedly until 
“OFF” appears, then press 
CLOCK/TIMER SET.