Sony com-1-b Manual De Usuario

COM-1.US.2-668-393-12(2)

 

 

•  When a connection to a wireless hotspot is successfully performed, certain types of 

wireless hotspots, such as commercial service providers’ hotspots, require additional 
log-in processes using the unit’s Web Browser. In order to assist determining if the 
connected wireless hotspot requires such steps, the unit tries to access a specific 
Website. For the details about this test access, please see below: 
Access address for connection type detection: http://www.sony.com/mylo/test; the Web 
address contains a simple static HTML page used for the test purposes only. There is no 
personal or network information sent from the unit. The Web server provided by Sony 
will not collect any information about the unit or the user.

When wireless network requires a WEP/WPA-PSK security key

If you select wireless network that requires a WEP/WPA-PSK security key, the 
Wireless Network Settings screen appears. Follow the instructions on the 
display to complete the connection.

Display Name

Enter a name to describe the wireless network in Connection 

Manager.

SSID

Wireless network SSID (Service Set Identifier)

WEP/WPA

Select from among “Do Not Use,” “Use WEP KEY,” or “Use 

WPA-PSK.”

KEY

Enter the security key of wireless network, if required. (If you 

do not know the security key, contact the administrator of 

your network.)

IP Address

When the network provides the IP address assignment 

service, the unit detects the following settings automatically:

• IP address
• Subnet mask
• Gateway
• DNS server

You can also set these settings manually. If you must 

manually enter these settings, but do not know what to enter, 

contact the administrator of your network.

WEB Proxy

If the unit is connected to a secured private network, such as 

an office network which has a firewall to the Internet, the unit 

may need to use Web proxy servers. If you are not sure if this 

setting is necessary, contact the administrator of your 

network.

If “Use Web Proxy” is selected, you can enter the following 

settings. 

If “Use Web Proxy” is not selected (default setting), the 

following settings are unavailable.

• Proxy address
• Proxy port

