Sony D-NE319 Manual De Usuario

Continued 

“Low Battery” appears on the 

display, and the CD does not play.

 The rechargeable battery is used up completely. Charge the 

battery (

 page 11). 

1)

 Replace the dry battery with a new LR6 (size AA) alkaline 

battery (

 page 10). 

“Hi DC in” appears on the display.

 An AC power adaptor which is rated higher than the one 

supplied or recommended is being used.  Use only the supplied 
AC power adaptor or the car battery cord recommended in 
“Optional Accessories” (

 page 32).

The CD does not play, or “No Disc” 

appears on the display when a CD 

is placed in the player.

 The CD is dirty or defective.  Clean it or change it.
 Check that the CD is inserted with the label side up 

(

 page 14).

 Moisture condensation has occurred.  Leave the CD player 

aside for several hours until the moisture evaporates.

 Close the lid of the battery compartment firmly ( page 10).
 Make sure the battery is inserted correctly ( page 10).
 Connect the AC power adaptor to an AC outlet securely 

(

 page 13).

 Press 



/ENTER after one second or more has passed since 

the AC power adaptor was connected.

 The CD-R/CD-RW in the player is blank.
 There is a problem with the quality of the CD-R/CD-RW, 

recording device, or application software.

“HOLD” flashes on the display 

when you press a button, and the 

CD does not play.

 The buttons are locked.  Slide the HOLD switch back 

(

 page 16).

Playback starts from the point you 

stopped (resume function).

 The resume function is working. To start play from the first 

track, press and hold 



/ENTER (



 on the remote) while the 

player is stopped until the first track starts playing, or open the 
lid of the player (

 page 15). Or, remove all power sources, 

and then insert the battery or connect the AC power adaptor 
again.

During playback of an ATRAC 

CD or MP3 CD, the CD does not 

rotate but you can hear the sound 

normally. 

 This player is designed to stop the rotation of an ATRAC CD 

or MP3 CD during playback to reduce the power consumption. 
The player is not malfunctioning.

“No File” appears on the display 

after you press 



/ENTER or 

when the lid of the player is 

closed.

 There are no ATRAC3plus/MP3 files on the CD-R/CD-RW.
 A CD-R/CD-RW from which the data has been erased is being 

used.

 The CD is dirty.

D-NE319/NE320/NE321.GB.2-318-868-12(1)