Sony dcr dvd dcr-dvd505 Manual De Usuario

brightness.
r

 (No flash): Records without flash.

• The recommended distance to the subject when 

using the built-in flash is 0.3 to 2.5 m (1 to 8 feet).

• Remove any dust from the surface of the flash 

lamp before using it. Flash effect may be impaired 
if heat discoloration or dust obscures the lamp.

• The flash charge lamp flickers when charging the 

flash, and remains lit when the battery charge is 
complete.

• If you use the flash in bright places such as when 

shooting a backlit subject, the flash may not be 
effective.

• The flash does not work when attaching the 

conversion lens (optional) or filter (optional).

• You can change the brightness of the flash by 

setting [FLASH LEVEL], or you can prevent the 
redeye by setting [REDEYE REDUC] (p.70).

To record the high resolution still 
images during recording a movie (Dual 
Rec) ............................  38qs 

You can record high resolution still images 
on the "Memory Stick Duo" or disc while 
recording a movie on the disc.

1

Press START/STOP qs or 8to start 
recording.

2

Press PHOTO 3 fully. 

The still image can be written up to 3 from 
start recording until finishing recording.

3

Press START/STOP qs or 8 to finish 
recording a movie. The written still 
images are displayed, then recorded on 
the selected destination media (“Memory 
Stick Duo” or disc). When 

 

disappears, recording is complete.

• Do not eject the “Memory Stick Duo” from your 

camcorder from after recording a movie is 

finished until the still images are recorded on the 
“Memory Stick Duo.”

• You cannot use the flash.
• When the POWER switch is set to 

 (Movie), 

the size of still images becomes  

2.3M (16:9 

wide)) or 3.0M (4:3).

• For details on the settings of [STILL MEDIA], 

refer to page 41.

• You can record still images during recording 

standby in the same way as when the POWER 
switch is set to 

 (Still). You can also record 

with the flash.

To record in dark places (NightShot)
.......................................... 1

Set the NIGHTSHOT switch 1 to ON. ( 

 

and [”NIGHTSHOT”] appear.)

• To record an image brighter, use Super NightShot 

function (p.71). To record an image brighter in 
dim light, use Color Slow Shutter function (p.71).

• The NightShot and Super NightShot use infrared 

light. Therefore, do not cover the infrared port 6 
with your fingers or other objects.

• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p.70) when 

it is hard to focus automatically. 

• Do not use these functions in bright places. This 

may cause a malfunction.

The number of 
recordable still 
images and 
recording media.
When the still 
image is written, 

 changes to 

orange.