Sony DSR-2000A Manual De Usuario
Chapter 6
Setup Menu
106
Chapter 6
Setup Menu
Basic Menu
Item number
Item name
Settings
001
PREROLL TIME
0S... 5S ...30S: Set the preroll time to between 0 and 30 seconds in steps of 1 second.
A preroll time of at least 5 seconds is recommended when using this unit for editing.
A preroll time of at least 5 seconds is recommended when using this unit for editing.
002
a)
CHARACTER
H-POSITION
H-POSITION
Adjust the horizontal screen position (as a hexadecimal value) of the text information
output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER)
connector for superimposed display on the monitor.
output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER)
connector for superimposed display on the monitor.
00... 0A ...2A (DSR-2000A) /00... 09 ...29 (DSR-2000AP): The hexadecimal value 00 is
for the far left of the screen. Increasing the value moves the position of the
characters to the right.
characters to the right.
003
a)
CHARACTER
V-POSITION
V-POSITION
Adjust the vertical screen position (as a hexadecimal value) of the text information
output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER)
connector for superimposed display on the monitor.
output from the VIDEO OUT 3 (SUPER) connector and SDI OUTPUT 3 (SUPER)
connector for superimposed display on the monitor.
00... 2E ...38 (DSR-2000A)/00... 37 ...43 (DSR-2000AP): The hexadecimal value 00 is
for the top of the screen. Increasing the value lowers the position of the characters.
004
SYNCHRONIZE
When editing using this unit as a controller and an external VCR connected to this unit
via a 9-pin remote control cable or i.LINK cable (DV cable), this item determines
whether or not to operate the two units in phase synchronization.
via a 9-pin remote control cable or i.LINK cable (DV cable), this item determines
whether or not to operate the two units in phase synchronization.
ON : Operate in phase synchronization.
OFF: Do not operate in phase synchronization.
005
DISPLAY
INFORMATION
SELECT
INFORMATION
SELECT
Determine the kind of text information to be output from the VIDEO OUT 3 (SUPER)
connector and SDI OUTPUT 3 (SUPER) connector when the CHARACTER switch on
the subsidiary control panel is set to ON.
connector and SDI OUTPUT 3 (SUPER) connector when the CHARACTER switch on
the subsidiary control panel is set to ON.
T&STA : Time data and the units status.
T&UB: Time data and user bit data. (When U-BIT is selected with the COUNTER SEL
button, the user bit data and time data arranged in that order are displayed.)
T&CNT: Time data and counter count. (When COUNTER is selected with the
COUNTER SEL button, the counter count and time data arranged in that order are
displayed.)
displayed.)
T&T: Time data and time code (TC or VITC).
TIME: Timecode (TC or VITC) only.
DATE: Recording date and time.
006
LOCAL
FUNCTION
ENABLE
FUNCTION
ENABLE
Determine which tape transport control buttons on the control panel are enabled when
this unit is controlled from external equipment.
this unit is controlled from external equipment.
DIS: All buttons and switches are disabled.
ST&EJ : Only the STOP button and EJECT button are enabled.
ENA: All buttons and switches except the RECORDER button and PLAYER button are
enabled.
007
TAPE TIMER
DISPLAY
DISPLAY
Determine whether to display the counter in 12-hour mode or 24-hour mode.
+ –12H : 12-hour mode
24H: 24-hour mode
008
MONITORING
SELECTION FOR
VTR-TO-VTR
EDIT
SELECTION FOR
VTR-TO-VTR
EDIT
For editing with two DSR-2000A/2000AP units, determine whether the recorder unit is
forced into E-E mode when the recorder PLAYER button is pressed to view the player
playback signals on the monitor.
forced into E-E mode when the recorder PLAYER button is pressed to view the player
playback signals on the monitor.
MANU : Do not force the recorder into E-E mode.
AUTO: Force the recorder into E-E mode.
009
a)
CHARACTER
TYPE
TYPE
Determine the type of characters such as time code output from the VIDEO OUT 3
(SUPER) connector and SDI OUTPUT 3 (SUPER) connector for superimposed display
on the monitor.
(SUPER) connector and SDI OUTPUT 3 (SUPER) connector for superimposed display
on the monitor.
WHITE : White letters on a black background.
BLACK: Black letters on a white background.
W/OUT: White letters with black outline.
B/OUT: Black letters with white outline.
Items in the basic menu
a) When setting items 002, 003, and 009, watch the monitor screen, and adjust to the required state.
(Continued)