Sony DVW-2000 Manual De Usuario
4-2
Playback
Chapter 4
Recording and Playback
4-10
Chapter 4
Recording and Playback
2
When the adjustment is completed, release the
PLAY button.
PLAY button.
The tape transport returns to normal speed, and the
SERVO indicator comes on again.
SERVO indicator comes on again.
To perform continuous capstan override
playback
playback
1
Set setup menu item 111 (TSO PLAY) to TSO.
2
Hold down the DMC EDIT button and turn the
MULTI CONTROL knob to select the playback
speed.
MULTI CONTROL knob to select the playback
speed.
The selected playback speed is displayed in time
data display area 2 on the lower control panel of
this unit as well as in the character information
display on the monitor screen.
data display area 2 on the lower control panel of
this unit as well as in the character information
display on the monitor screen.
3
Press the PLAY button while holding down the
DMC EDIT button.
DMC EDIT button.
4
Press the PLAY button or perform any other
operation to exit the tape speed override mode.
operation to exit the tape speed override mode.
See Section 12-2 “Setup Menu operations” (page 12-2) for
details of setup menu operations.
details of setup menu operations.
For details of character information displayed on the video
monitor screen, see the descriptions of F4 (CHARA) in
function menu page 4 (page 11-7) and setup menu item 005
(page 12-5).
monitor screen, see the descriptions of F4 (CHARA) in
function menu page 4 (page 11-7) and setup menu item 005
(page 12-5).
Z
3
2