Sony HTCT260H Manual De Usuario

26

GB

BT.STBY
(BT STANDBY)

When the system has pairing information, the system is in 
BLUETOOTH standby mode even when it is turned off.



ON: BLUETOOTH standby mode is enabled. The 
illumination LED flashes in blue slowly when the system is 
turned off.



OFF: BLUETOOTH standby mode is disabled.



If the system does not have pairing information, 
BLUETOOTH standby mode cannot be set.



During BLUETOOTH standby mode, standby power 
consumption increases.

BT.VOL 
(BT VOLUME 
CONTROL)

You can set how this system operates when the volume is 
adjusted via a BLUETOOTH device.



ON: Allows you to adjust the volume of the system via a 
BLUETOOTH device. The range of volume turned up or 
down by one operation is limited to within 5 steps of the 
volume level of this system.



OFF: The volume cannot be adjusted via a BLUETOOTH 
device.



DIRECT: The volume of the system is set as it is adjusted via 
a BLUETOOTH device.



In the case of “DIRECT,” the system may output sound at a 
large volume, depending on a BLUETOOTH device.

A. STBY
(AUTO STANDBY)

You can reduce power consumption. The Sound Bar enters 
standby mode automatically when you do not operate the 
Sound Bar for about 20 minutes and the Sound Bar is not 
receiving an input signal.



ON: Turns on the “A. STBY” function.



OFF: Turns off the function.

IR REP

If the remote control of a TV cannot control the TV, the Sound 
Bar can relay the remote control signal to the TV to control 
the TV.



ON: The relay function is enabled.



OFF: The relay function is disabled.

VERSION

The current firmware version information appears on the 
front panel display.

LINK

Use this item when you want to enable the wireless 
transmission (page 27).