Sony kdl-37v55-56xx Manual De Usuario
C:\Documents and Settings\Dolors\Mis documentos\2009\EX2L_CORREC
PARAL\11_UK_EX2L\070OPT.fm
PARAL\11_UK_EX2L\070OPT.fm
masterpage:Left
24
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Viewing Pictures from
Connected Equipment
Turn on the connected equipment, then
perform the following operation.
perform the following operation.
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
The picture from the connected equipment
appears on the screen.
For an auto-tuned VCR
In analogue mode, press PROG +/– or the
number buttons, to select the video channel.
number buttons, to select the video channel.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
~
• This function is not available for a PC input.
1
Press OPTIONS.
2
Press F/f to select “PAP”, then press .
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
3
Press the number buttons or PROG +/– to
select the TV channel.
select the TV channel.
To return to single picture mode
Press
RETURN.
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
– PIP (Picture in Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
1
Press OPTIONS.
2
Press F/f to select “PIP”, then press .
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use F/f to change the position of
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use F/f to change the position of
the TV programme screen.
3
Press the number buttons or PROG +/– to
select a TV channel.
select a TV channel.
To return to single picture mode
Press
RETURN.
z
• You can switch the audible picture by pressing G/
• You can switch the audible picture by pressing G/
g.
1
Press .
2
Press F/f to select
the desired input
source, then press .
the desired input
source, then press .
010COV.book Page 24 Tuesday, January 20, 2009 5:15 PM