Sony klv-w40a10e Manual De Usuario

 GB

Connect your aerial with the supplied 
coaxial cable.

If connecting to an aerial only (A)
Connect your aerial to the 

 socket on the rear of 

the TV, then go to step 3.
If connecting to a VCR with an aerial (B)
Connect your aerial to the input socket on your 
VCR.

Connect your VCR.

1

Connect the output socket on your VCR to the 

 socket on the rear of the TV with the RF 

lead.

2

Connect the scart socket on your VCR to the 

/

2 scart socket on the rear of the TV 

with a scart lead.

Connect the supplied mains lead to the AC 
IN socket on the rear of the TV.

Do not connect the mains lead to your mains socket until 
all connections are complete.

Bundle the cable.

1

Run the mains lead through the bundling band 
and attach to the right of the rear panel with 
the supplied screw.

2

Remove the screw to open one side of the 
cable cover and run the cables through, then 
tighten the screw again.

For additional stability, the anchor attachments on the 
back of the TV can be used to secure the TV to a wall. 
(Do not remove the anchor attachments).

Run suitable cables through the holes of 
both anchor attachments on the back of the 
TV.

Anchor the cables to a stable surface such 
as a wall or pillar.

1

2

anchor attachment 
(with hole)

cable (not supplied)

wall anchor bracket 
(not supplied)