Sony klv-w40a10e Manual De Usuario
32
GB
Option
Description
Programme
Presets programme channels manually.
1
Press
M/m to select “Programme”, then press OK.
2
Press
M/m to select the programme number you want
to manually tune (if tuning a VCR, select channel 0),
then press
then press
<.
3
Press
M/m to select “System”, then press OK.
Note
Depending on the country/region selected for “Country”
(page 29), this option may not be available.
Depending on the country/region selected for “Country”
(page 29), this option may not be available.
4
Press
M/m to select one of the following TV broadcast
systems, then press
<.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
5
Press
M/m to select “Channel”, then press OK.
6
Press
M/m to select “S” (for cable channels) or “C” (for
terrestrial channels), then press
,.
7
Tune the channels as follows:
If you do not know the channel number (frequency)
Press
Press
M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press
searching, press
M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
8
Press OK.
9
Press
m to select “Confirm”, then press OK.
10 Press m to select “OK”, then press OK.
Repeat the procedure above to preset other channels manually.
Repeat the procedure above to preset other channels manually.
System
Channel
Label
Assigns a name of your choice, up to five letters or numbers, to the
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
1
Follow steps 3 to 5 of “Programme Labels” (page 30).
2
Press
m to select “Confirm”, then press OK.
3
Press
m to select “OK”, then press OK.
AFT
Fine-tunes the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
1
Press
M/m to adjust the fine tuning over a range of -15
to +15, then press OK.
2
Press
m to select “Confirm”, then press OK.
3
Press
m to select “OK”, then press OK.
To restore automatic fine tuning, select “On” in step 1.