Sony MDS-E10 Manual De Usuario
27
Playing an MD
POWER
AMS
1
Turn on the mixer.
2
Adjust the fader or level of the connected channel
of the mixer.
of the mixer.
3
Press POWER to turn on the recorder.
4
Insert an MD.
5
If necessary, turn AMS (or press ./>
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 6.
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 6.
6
Press 7.
The recorder starts playing.
The recorder starts playing.
Operations you may want to do during play
To
Press or turn
Stop play
x
Pause play
7
Resume play after pausing 7
Locate a succeeding track
Locate a succeeding track
AMS clockwise (or press >
repeatedly)
repeatedly)
Locate the beginning of
AMS counterclockwise (or
the current track or
press . repeatedly)
a preceding track
Eject the MD
Eject the MD
After stopping play A
z
To play the MD on which LP2, LP4 stereo recording or MONO
recording has been performed
By pressing 7 in step 6 above, “LP2,” “LP4,” or
“MONO” lights up depending on the mode recorded
on the lower left of the display window.
recording has been performed
By pressing 7 in step 6 above, “LP2,” “LP4,” or
“MONO” lights up depending on the mode recorded
on the lower left of the display window.
z
To use headphones
Connect them to PHONES jack. Turn PHONE LEVEL
to adjust the volume.
Connect them to PHONES jack. Turn PHONE LEVEL
to adjust the volume.
Playing MDs
This chapter explains the various ways to
play MDs.
play MDs.