Sony md-sje780 Manual De Usuario
SONY JE780
This manual is translated from the original Japanese version, it is
best understood by looking at the numbered steps in the Japanese manual
while reading along with the English.
best understood by looking at the numbered steps in the Japanese manual
while reading along with the English.
RECORDING (page 14)
1-Turn on of source of recording power
2-Choose output source
3-Turn power on JE470
4-Insert recordable MD
5-Press input button to choose source of recording
6-Press REC button
7-Adjust recording level if necessary, see page 18
8-Press the PLAY or PAUSE button on unit then begin playback on
recording source
1-Turn on of source of recording power
2-Choose output source
3-Turn power on JE470
4-Insert recordable MD
5-Press input button to choose source of recording
6-Press REC button
7-Adjust recording level if necessary, see page 18
8-Press the PLAY or PAUSE button on unit then begin playback on
recording source
GROUP RECORDING (page 15)
1-Follow steps 1-5 of RECORDING
2-Press GROUP ON/OFF button
3-Press REC button
"New Group" will display and unit will be in record ready mode
4-Follow steps 7-9 of RECORDING
To record in a new group after recording is complete press the STOP
button until
the disc name and number of groups display then repeat steps 3-4
NOTE-If when pressing REC button "Group Full!" displays there is not
enough character memory to record a group. Erase any unnecessary
character information.
-One MD can contain 99 groups
1-Follow steps 1-5 of RECORDING
2-Press GROUP ON/OFF button
3-Press REC button
"New Group" will display and unit will be in record ready mode
4-Follow steps 7-9 of RECORDING
To record in a new group after recording is complete press the STOP
button until
the disc name and number of groups display then repeat steps 3-4
NOTE-If when pressing REC button "Group Full!" displays there is not
enough character memory to record a group. Erase any unnecessary
character information.
-One MD can contain 99 groups
RECORDING INTO AN EXISTING GROUP (page 16)
1-Follow steps 1-5 of RECORDING
2-Press GROUP ON/OFF button
3-Press GROUP SKIP button to display the group you want to record into
4-Press REC button
"New Track" will display
5-Follow steps 7-9 of RECORDING
1-Follow steps 1-5 of RECORDING
2-Press GROUP ON/OFF button
3-Press GROUP SKIP button to display the group you want to record into
4-Press REC button
"New Track" will display
5-Follow steps 7-9 of RECORDING
MDLP RECORDING (page 17)
1-Follow RECORDING steps 1-5
2-Press REC MODE button to choose one of the following:
Stereo(no display)/LP2/LP4/MONO
1-Follow RECORDING steps 1-5
2-Press REC MODE button to choose one of the following:
Stereo(no display)/LP2/LP4/MONO
TURNING LP STAMP ON/OFF (page 17)
1-When playback is stopped pause or active press MENU/NO button
2-Turn AMS DIAL (remote forward/back) to display SETUP? then press AMS
or YES button
3-Turn AMS DIAL (remote forward/back) to display LP STAMP ON or LP
STAMP OFF then press AMS or YES button
4-Turn AMS DIAL (remote forward/back) to display LP STAMP ON then press
AMS or YES button
5-Press MENU/NO button
1-When playback is stopped pause or active press MENU/NO button
2-Turn AMS DIAL (remote forward/back) to display SETUP? then press AMS
or YES button
3-Turn AMS DIAL (remote forward/back) to display LP STAMP ON or LP
STAMP OFF then press AMS or YES button
4-Turn AMS DIAL (remote forward/back) to display LP STAMP ON then press
AMS or YES button
5-Press MENU/NO button
ADJUSTING RECORDING LEVEL (page 18)
1-Follow steps 1-6 of RECORDING
2-Playback the highest level of the material being recorded
1-Follow steps 1-6 of RECORDING
2-Playback the highest level of the material being recorded