Sony mhc-s3 Manual De Usuario

Tape

Turn FUNCTION to
select the recording
source.

Recording from a tape

(High-Speed Dubbing)

Recording from a CD

(CD Synchro Recording)

Recording manually

Insert a recordable tape into deck B.

Turn FUNCTION to select
“TAPE A”.

Turn FUNCTION to select
“CD”.

Insert the tape you want to
record into deck A.

Insert the CD you want to
record.

Prepare the recording
source.

Press CD SYNC.

Press REC PAUSE/
START.

Deck B stands by for recording.

“REC” indicator flashes in the display.

To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that
“DOLBY NR” appears in the display (except when recording from a tape).

Press DIRECTION repeatedly to select

to record on one side.

Select

(or RELAY) to record on both sides.

Press REC PAUSE/START.

Recording starts.

Steps

Recording to a tape

— CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program

Edit

You can record from a CD, tape, radio or other connected component. You can use TYPE I (normal)
or TYPE II (CrO

) tapes. The recording level is adjusted automatically.

Press

Stop recording

x (CD or Deck B).

Pause recording*

REC PAUSE/START.

* Only when recording manually.

Tips

• If you want to record from the reverse side, press

n or N (Deck B) (or TAPE B hH on the
remote) which does not light up after step 4 (when
the deck B is in recording pause).

• When you record on both sides, be sure to start

from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.

• (High-Speed Dubbing only)

If you set direction to j when the tapes have
different lengths, the tapes in each deck reverses
independently. If you select RELAY, the tapes in
both decks reverse together.

Note

The sound field automatically switches to 2CH
STEREO when you start recording.

Press HI-DUB.

Start playing the
recording source.

continued