Sony pcg-grt785b Manual De Usuario
Sony
Notebook U
s
er Guide
Getting help
105
N
When I turn on my computer, the message Press <F1> to resume, <F2> to setup appears
This message is telling you to initialise the BIOS (Basic Input/Output System).
If the floppy disk drive is empty, proceed as follows to initialise the BIOS:
1
Turn off the computer.
2
Remove any peripheral devices connected to the computer.
3
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
The BIOS setup menu screen appears.
4
Set the date (month/day/year).
5
Press Enter.
6
Press the arrow keys to select System Time.
7
Set the time (hour:minute:second).
8
Press Enter.
9
Press the arrow keys to select the Exit menu.
10
Press the arrow keys to select Get Default Values and then press <Enter>. The Load default
configuration now? message appears.
configuration now? message appears.
11
Make sure that Yes is selected and then press <Enter>.
12
Press the arrow keys to select Exit (save changes) and then press <Enter>.
The Save configuration changes and exit now? message appears.
The Save configuration changes and exit now? message appears.
13
Make sure that Yes is selected and then press <Enter>.