Sony pcv-rs602 Manual De Usuario
41
Connecting peripheral devices
Hardware Guide
Connecting a Universal Serial Bus (USB) device
You can connect a USB device such as a scanner, a floppy disk drive or a printer, to your VAIO desktop.
To connect a USB device, simply plug in the USB cable of the device into one of the
ports on your computer.
❑
USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices
unless the manual supplied with the device states otherwise.
unless the manual supplied with the device states otherwise.
❑
For some USB devices you need to install the software before you connect the device. Not following this procedure might cause
the device not to work properly. For more information, check the manual provided with the USB device.
the device not to work properly. For more information, check the manual provided with the USB device.
❑
The Sony UMH-U HS-XX USB Device icon (or similar) is shown in the taskbar when a USB device is in use. However, it also
runs Memory Sticks, CompactFlash cards and SmartMedia. It is important that you do not use this icon to disable these memory
cards, as it disables all the slots. If you accidentally remove any of the cards via this icon, please restart your computer.
runs Memory Sticks, CompactFlash cards and SmartMedia. It is important that you do not use this icon to disable these memory
cards, as it disables all the slots. If you accidentally remove any of the cards via this icon, please restart your computer.