Sony pcv-rs216 Manual De Usuario
S
o
ny
V
A
IO Des
k
to
p Us
er Guide
Upgrading your VAIO computer
74
Removing the cover
To remove the cover from the main unit, proceed as follows:
1
Shut down your computer and disconnect all peripheral devices, such as your
printer.
printer.
2
Unplug the computer from the mains.
3
Wait until the computer cools down.
The inside of the main unit becomes very hot during operation. Wait for about
one hour for the computer to cool down before opening the unit.
The inside of the main unit becomes very hot during operation. Wait for about
one hour for the computer to cool down before opening the unit.
4
Position the main unit so the back panel is facing you.
5
Unscrew the three cover release screws located on the edges of the back panel,
and set them aside.
The cover is released.
and set them aside.
The cover is released.
✍
This illustration may not correspond to the configuration of your model. Please check the section Back Panel of your
printed Specifications sheet to see where the ports are exactly.
printed Specifications sheet to see where the ports are exactly.
6
Slide the cover towards the back of the unit to remove it.