Sony plm-a55 Manual De Usuario
18
-US
Turning on the Glasstron
After you complete all of the connections and put on the Glasstron properly, turn on the
Glasstron and follow the procedures below.
Glasstron and follow the procedures below.
1 Checking the display unit position n This page
2 Checking the screen position alignment n Pages 20 through 22
3 Setting a password n Pages 22 and 23
If you do not want to use a password, you have to set the Glasstron to operate without
using a password in “Setting the password.”
using a password in “Setting the password.”
Checking the display unit position
Every time you turn on the Glasstron, the adjustment screen appears to help you adjust the
display unit properly. Adjust the display unit following the procedure below.
display unit properly. Adjust the display unit following the procedure below.
1
Turn on the Glasstron using the POWER switch.
The POWER lamp lights up.
2
Turn the SEL/PUSH EXEC jog dial to select the language, English or
French, then press the jog dial.
French, then press the jog dial.
3
Read the WARNING and press the jog dial.
Screen
ON / OFF
POWER
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
FRANÇAIS
EXEC
SEL
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
FRANÇAIS
EXEC
SEL
PUSH DISPLAY
SEL / PUSH EXEC
FOR YOUR SAFETY AND TO
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER’S MANUAL.
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER’S MANUAL.
CHECK
WARNING
PUSH DISPLAY
SEL / PUSH EXEC