Sony pcv-rsm22 Guía Del Software
So
ft
w
a
re
G
u
id
e
Using Click to DVD
85
❑
When loading images from a device, loading is automatically cancelled under the following conditions.
❑
when a blank segment of tape of 10 seconds or longer is reached.
❑
when the timestamp information recorded on the tape for a particular segment precedes the
timestamp information for a video segment transferred from an earlier part of the tape, indicating
that video segments were recorded out of order.
timestamp information for a video segment transferred from an earlier part of the tape, indicating
that video segments were recorded out of order.
❑
when the device from which video is being loaded undergoes a change in status.
❑
when the connection is broken between the computer and the device from which video is being
loaded
loaded
❑
Video content with a 4:3 aspect ratio and video content with a 16:9 aspect ratio cannot be written to the
DVD. If the aspect ratio of the video that is recorded on the tape changes, transfer of the video stops at
that point, and creation of the DVD begins.
DVD. If the aspect ratio of the video that is recorded on the tape changes, transfer of the video stops at
that point, and creation of the DVD begins.
❑
You cannot transfer video segments that are less than one second long.
❑
Depending on your computer's settings, frame drop-out may occur when using Click to DVD to load
video from DV devices. If this occurs, read Recommended settings
video from DV devices. If this occurs, read Recommended settings
and adjust settings as
appropriate.
❑
The original photography date is being carried over from video tapes that are recorded using DVgate
Motion. Loading by Click to DVD and Click to DVD Automatic is automatically cancelled if the
photography date on the tape changes from a later date to an earlier date.
Motion. Loading by Click to DVD and Click to DVD Automatic is automatically cancelled if the
photography date on the tape changes from a later date to an earlier date.