Sony rdr-gx257 Manual De Usuario
17
H
ook
up
s and
s and
Se
tti
tti
n
gs
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
entering them one at a time until you find the
one that works with your TV.
The remote performs the following:
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
“Step 6: Initial Setup.”
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
“Step 6: Initial Setup.”
1
Turn off the recorder.
2
Hold down x (stop) on the recorder until
“codE” appears on the front panel display.
“codE” appears on the front panel display.
3
Press ./> on the recorder to select
the command mode (1, 2, or 3).
the command mode (1, 2, or 3).
The selected command mode appears on the
front panel display.
front panel display.
4
Hold down the remote’s ENTER and 1, 2, or
3 of the number buttons corresponding to
the command mode selected in step 3, for
more than three seconds.
3 of the number buttons corresponding to
the command mode selected in step 3, for
more than three seconds.
Manufacturer
Code number
Sony
01 (default)
Hitachi
02
LG/Goldstar/NEC
04
Mitsubishi/MGA
13
Panasonic
19
Philips
21
Pioneer
16
RCA
10
Samsung
20
Sharp
18
Toshiba
07
Buttons
Operations
TV [/1
Turns your TV on or
off.
off.
TV VOL +/–
Adjusts the volume
of your TV.
of your TV.
TV CH +/–
Selects the channel
on your TV.
on your TV.
TV INPUT
Switches your TV’s
input source.
input source.
If you have a Sony DVD player or
more than one Sony DVD recorder
more than one Sony DVD recorder
The default command mode setting for this
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder
and remote. Set the same command mode.
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder
and remote. Set the same command mode.
1
2
3
4
5
6
7
8
9
0
x
./>
Number buttons
</M/m/,,
ENTER
ENTER
,continued