Sony RM-AV2500T Manual De Usuario

Descargar
Página de 140
41
GB
Selecting a Channel
with a Single Key Press
— Channel Macro Function
You can programme the Channel Macro
function for the keys listed below (macro
keys).
If you programme the operation of
entering the 1, 2, 3 and ENTER keys for a
macro key, you can select the channel 123
by pressing that single key.
Component
Macro key
TV:
PIP STILL, PIP TEXT, PIP
CH+, PIP MOVE, PIP
SWAP, PIP CH-
CBL:
m
, N, M, REC*, x, X
SAT:
m
, N, M, REC*, x, X
*
You can programme this function for REC
key alone (not on the REC + B key for a
double-key operation).
TV
CD
MD
SAT
VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
2
1
5
To receive the data of a
Component Select button from
another remote commander
1~2
Perform Steps 1 and 2 on page
40.
3
Press the 2 key.
4
Press the Component Select
button to which want to assign
the data.
5
Press the ENTER key.
When the data have been received,
“TV” and “
r” go off. If the data have
been successfully received, the
backlight of the display turns off.
Notes
• If the Commander is not ready for
receiving the data, press CLEAR key, then
OK key to clear the learned signal on all
or one of the Component Select buttons.
• If “NG” appears during data transfer, go
back to Step 3 and continue the operation
or press COMMANDER OFF to stop the
operation. If you continue the operation,
you have to set the sending remote
commander again to send data.
Continued