Sony DH280 Manual De Usuario

Ot
her

s

Using the SNC toolbox

108

Number
The set mask number is displayed in the Viewer when 
Solid PTZ (page 45) is off.

Frame
When Solid PTZ (page 45) is off. display the frame of 
the set mask to distinguish the mask area when the set 
mask is overlapped.

Panorama area
Display the panorama when Solid PTZ (page 45) is on.
The set privacy mask is displayed by numbers on the 
panorama. When the panorama is clicked, the camera 
will focus on the place clicked.

If a panorama image has not been created, the default 
image is displayed.

PTZ controller
Pan/tilt/zoom functions are available when Solid PTZ 
(page 45) is on.

Pan/tilt operation
Click the arrows in the direction you want the camera 
to move. Press and hold the arrows to move the 
camera continuously.

Zoom operation
Click the 

 button to zoom out, click the 

 

button to zoom in. Press and holf the button to zoom 
continuously.
The zoom bar displays the current zoom position 
with Wide at the right end, and Tele at the left end. 
Click the 

 button to adjust the zoom to Wide, 

Click the 

 button to adjust the zoom to Tele.

Privacy mask setting section
Allows you to set or delete the privacy mask.
You can set up to eight privacy masks.
Set: Register the area specified on the viewer as a 

privacy mask area.
Click Set and the portion of the viewer image is 
masked with the privacy mask. The color of the 
privacy mask is that selected with the Color drop-
down list.

If the mask area is close to the bottom of the image, the 
background at the bottom may still be visible.

Color
Specify the color or mosaic of privacy masks. This 
setting is common to every privacy mask.
The selectable colors are as follows:

Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, 
White, Red, Green, Blue, Cyan, Yellow, Magenta

Clear all
Click to delete all privacy masks simultaneously.

To set a privacy mask in a desired position, do the 
following:

Specify the privacy mask area by dragging the 
mouse on the viewer.

Select the color or mosaic of the mask from the 
Color drop-down list.

The color is common to every privacy mask. The 
color last selected is applied.

Select the desired privacy mask number in the 
privacy mask setting section, and then click Set of 
the corresponding number.
The mask is displayed on the viewer.

The Custom Homepage function of the SNC toolox 
allows you to store the homepage that you have created 
in the camera and watch it.

Notes on creating the homepage
When you are creating the homepage, note the following 
points.
• The file name should be typed using up to 24 

characters including the extension.

• The file size of the homepage should be 2.0 MB or 

less.

• To see the created homepage, set the Homepage in the 

Layout tab from viewer menu.

Select the device to upload from the Device list.
You can select multiple devices at the same time.

Click the Custom Homepage.
The “Custom Homepage” dialog opens. 
Read the notes carefully.