Sony DH280 Manual De Usuario

Ot
her

s

Using the SNC audio upload tool — Transmitting Audio to Camera

114

The supplied SNC audio upload tool allows you to 
transmit sound from the computer to the camera. 
This section explains the setup and operations of the 
SNC audio upload tool.

The SNC audio upload tool supports the following audio 
data to be transmitted.

• Only one user can transmit sound to the camera. 

Meanwhile, another user will not be able to transmit 
sound to the camera.

• If proxy server is enabled, sound uploading to the 

camera may fail. In that case, disable the proxy server.

Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web 
browser.
If it does not appear automatically in the Web 
browser, double-click on the index.htm file on the 
CD-ROM.

When you are using Windows Vista, pop-up “Auto 
Play” may appear. For details, “Installing software” 
in “When using Windows Vista” on page 10.

Click the Setup icon of SNC audio upload tool.
The “File Download” dialog opens.

When you are using Windows XP Service Pack 2 or 
later, or Windows Vista, a message regarding the 
active contents may appear. For details, see 
“Installing software” in “When using Windows XP 
Service Pack 2 or later” on page 8 or “Installing 
software” in “When using Windows Vista” on 
page 10.

Click Open.

If you click “Save this program to disk” on the “File 
Download” dialog, you cannot install the tool 
correctly. Delete the downloaded file, and click the 
Setup icon again.

Install the SNC audio upload tool following the 
wizard displayed.
If the Software License Agreement is displayed, 
read it carefully and accept the agreement to 
continue with the installation.

Connect a speaker to the 5 (line output) jack on the 
camera.

Connect a microphone to the microphone input jack 
on the computer.

If the microphone input jack of the computer is not set 
correctly, no sound is transmitted from the computer and 
nothing is output from the speaker connected to the 
camera.
Set the microphone input jack from the control panel of 
Windows. 

Select Sounds and Audio Device from Control 
Panel.

Click Volume in the Sound Recording section on 
the Audio tab.
The Recording Control window opens.

Check Select in the Microphone section.

There are no settings regarding the microphone jack.
If recording cannot be made, connect a microphone 
device to the computer and check that the recording 
device operates correctly, as follows:

Select Sound from Control Panel.

Open the Recording tab and check that Windows has 
recognized the hardware correctly.

G.711 (µ-LAW)

64 kbps

G.726

40 kbps

G.726

32 kbps

G.726

24 kbps

G.726

16 kbps