Sony remote control panel rcp-d50-d51 Manual De Usuario

26

RCP Config Security

Engineer Mode

To set whether to display “Status”, “Menu Set”, and “Code No.” or
not (With Engineer Mode ON, all operative menu items are
displayed regardless of the Advance Mode setting.)

Status 

a)

Advance Mode

To switch between the Normal Setting mode and Advanced Setting
mode of the menu

Screen Md Enable

To set whether switching between 4:3 and 16:9 is enabled or not

Pan/Tilt Enable

To set whether panning/tilting adjustment is enabled or not

Power On Active

To specify the Panel Active and Iris/Master Black Active statuses
when the unit is started up
    Full Active: To set the unit to the Panel Active status when started up
    IRIS/M.Black: To set the unit to the Iris/Master Black Active

status when started up

    Lock: To set the unit to the Panel Lock status when started up
    Keep state: To set the unit to the previous state when started up

Panel Active Lock

To set whether to use the Panel Active Lock function with a security
code or not.
   Disable: Not to use the Panel Active Lock function
   Enable: To use the Panel Active Lock function by specifying a
new security code
    Enable (Engineer Code): To use the Panel Active Lock function
with the same security code as that for Engineer Mode

Code Change

To change the security code for Panel Active Lock (displayed only
when a security code for Panel Active Lock has been set)

Menu Set 

a)

To select an item to be displayed on the function menu. Select the
number (1-7) using • Cur, and select the item with • Sel:   White,
Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black
STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White
Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump

Code No. 

a)

Code No.

To enable/disable the security code setting for Engineer Mode

Code Change

To change the security code for Engineer Mode (displayed only
when a security code for Engineer Mode has been set)

LCD

LCD Brightness/Contrast

• Bright

To set the brightness of the LCD of the unit

• Cont

To set the contrast of the LCD of the unit

LCD Moni.

LCD Monitor

• Bright

To set the brightness of the LCD of the unit when displaying the
camera picture

Brightness/Contrast

• Cont

To set the contrast of the LCD of the unit  when displaying the
camera picture

Memory Stick Memory Stick

Format

To perform formatting of the Memory Stick

(cont.)

a) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.