Sony remote control panel rcp-d50-d51 Manual De Usuario

48

You can adjust the brightness and contrast of the
display of the menu control block.
Proceed as follows:

Press 

[LCD]

 on the OTHERS menu to display the

LCD setting display.

LCD Brightness

/Contrast

Clear

Exit

5

5

Cont

Bright

Adjust Bright and Cont (5 is the standard value
with both items).

Press 

[LCD Moni.]

 on the OTHERS menu to

display the LCD setting display.

Adjust Bright and Cont (5 is the standard value
with both items).

When the adjustment is completed
Press 

[Exit]

 to leave the menu.

You can assign a function to the ASSIGN button.
Note that the assignable functions depend on the
connected camera.
Proceed as follows:

Press the OTHERS button in the Menu operation
block so that the OTHERS menu is displayed on
the LCD, then press [RCP Config] to call the RCP
Config menu.

Set the menu to Advanced Setting mode.

1) Press [Security] on the RCP Config menu.

2) Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.] buttons
are displayed.

3) Press [Status].

The Security Status menu appears.

4) Press [Advance Mode].

Press 

[SW Setting]

 on the RCP Config menu to

obtain the SW Setting display.

Exit

RCP Config Menu

SW Setting

BlackAUTO
ATW
TLCS
DynaLatitude

SW Assign
NoAssign
Black/Flare

   Sel

Turn the second left control knob (Sel) to highlight
the function to be assigned.
NoAssign (default):  No assignment
Black/Flare: Switching the function of the

BLACK/FLARE knobs

Black AUTO: ON/OFF of the auto black
ATW: ON/OFF of the auto tracing white balance
TLCS: ON/OFF of the total level control function
DynaLatitude: ON/OFF of the DynaLatitude

function

Some functions may be unoperative, depending on the
connected camera.

When the assignment is completed
Press 

[Exit]

 to leave the menu.