Sony SNC-CH110 Manual De Usuario

Descargar
Página de 97
A
d
mini
s
tra
ting
 t
he 
Came
ra
Setting the SSL function — SSL Menu
51
Note
Click Cancel at the bottom of the menu if you want to 
cancel changing the private key password after clicking 
Reset. Doing so restores the other setting items in the 
Client certificate tab to the previous settings.
OK/Cancel
Note
When you click OK after changing SSL setting, close 
the main viewer and the setting window once.
CA certificate tab — Adding the CA 
certificate for client authentication
In this tab, you can manage the CA certificate needed for 
the camera to use the client authentication of the SSL 
function.
Note
When using the client authentication, the personal 
certificate must be successfully installed on the PC to 
use it. If this preparation cannot be performed, do not 
configure settings on this tab. Otherwise, you may not be 
able to connect to the camera.
SSL client authentication
You can configure whether to enable the client 
authentication of the SSL function.
Trusted CA certificate 1 to 4
You can import a trusted CA certificate (route 
certificate, etc.) to the camera.
Up to four certificates from trusted CAs can be imported 
to the camera. Only PEM format is supported.
To import the CA certificate
1
Click Browse… to select the CA certificate to be 
saved in the camera.
2
Click Submit
The selected file will be imported to the camera.
Note
Import process will be invalid if the selected file is not a 
CA certificate.
To display the information of the CA certificate
When the CA certificate has been saved in the camera 
correctly, its information appears on Issuer DN
Subject DNValidity Period, and Extended Key 
Usage
 for your reference.
To delete the CA certificate
Click Delete to delete the selected CA certificate from 
the camera.
Tip
To enable a client certificate, it is recommended that the 
settings are configured following the procedure below:
1
Import the necessary CA certificate.
2
Set SSL client authentication to On and 
click OK.
Note
When you set SSL client authentication to On and click 
OK, the camera will immediately operate to enable 
client authentication. Make sure that the personal 
certificate on your PC is successfully installed.
OK/Cancel