Sony SNC-RZ30N Manual De Usuario

Ad
minis

tra

ting t

he Camer

a

Setting the Camera — Camera setting Page

21

Select the electronic shutter speed from among the 
following:
SNC-RZ30N:
1/10000, 1/6000, 1/4000, 1/3000, 1/2000, 1/1000, 
1/725, 1/500, 1/350, 1/250, 1/180, 1/125, 1/100, 1/90, 
1/60, 1/30, 1/15, 1/8, 1/4, 1/2, 1 (seconds).
SNC-RZ30P:
1/10000, 1/6000, 1/3500, 1/3000, 1/2500, 1/1750, 
1/1000, 1/600, 1/420, 1/300, 1/215, 1/150, 1/120, 1/100, 
1/75, 1/50, 1/25, 1/12, 1/6, 1/3, 1/2, 1 (seconds).

Select the iris (F number) from among the following:
F1.6, F2, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F5.8, F8.0, 
F9.6, F11, F14, F16, F19, F22, F28, Close.

Select the gain (dB) from among the following:
-3 dB, 0 dB, 2 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, 14 
dB, 16 dB, 18 dB, 20 dB, 22 dB, 24 dB, 26 dB, 28 dB

When the shutter speed is set to 1 sec or 1/2 sec in the 
Shutter priority or Manual mode, set the Focus mode 
menu and the White balance mode menu to Manual.

When the Exposure mode menu is set to Full auto, 
Shutter priority or Iris priority, select On to activate 
the exposure compensation, or Off to deactivate it.
When it is set to On, select the EV value from among the 
following:
+1.75, +1.5, +1.25, +1, +0.75, +0.5, +0.25, 0, –0.25, –
0.5, –0.75, –1, –1.25, –1.5, –1.75 (EV)

Select the saturation in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest saturation.

The Saturation setting is effective for the computer 
image only.  (It is not effective for the video signal 
output.)

Select the sharpness in 16 steps, from 1 to 16.
Selecting 16 gives the image with the highest sharpness.

Select the contrast in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest contrast.

The Contrast setting is effective for the computer image 
only.  (It is not effective for the video signal output.)

Select the stabilizer to compensate oscillation.
Select On to activate the stabilizer when the camera is 
exposed to oscillation.
Normally select Off.

• If you pan or tilt the camera with the Stabilizer menu 

set to On, it will take about 5 seconds until the monitor 
image becomes stable after panning or tilting.

• The stabilizer was developed in order to compensate 

the oscillation generated by human hands. The 
stabilizer may not be effective depending slightly on 
the amount of oscillation.

• The view angle differs depending on the Stabilizer On/

Off setting.

Click Apply, and “Camera reset OK?” appears.  Click 
OK on the dialog to reset the camera settings on the 
Camera setting page to the factory settings.

Select the Day/Night mode that selects the IR (infrared) 
cut filter operation mode from among Disable, Auto, 
Manual and Timer.
After selecting the mode, click OK to update the camera 
to the selected mode.

Disable: The Day mode is always set.

Auto: The Day/Night mode is set automatically.  It is 

normally set in the Day mode and changes to the 
Night mode in a dark place.

Manual: Set the Day/Night mode manually.

If you select Manual, On and Off appear. Select On 
to set to the Night mode, and Off to the Day mode.

Timer: Set the Day/Night mode using the timer.  

If you select Timer, the Schedule No. menu appears 
at the bottom.  Select the schedule so that the Day/
Night mode is normally set to the Day mode,  and it 
enters the Night mode at the start time of the 
schedule and returns to the Day mode at the end time.

When the Day/Night mode menu is set to Timer, click 
the check box of the desired schedule No.1 to 6 to 
activate the Day/Night mode.