Sony STR-DE598
masterpage:Left
lename[D:\Sony SEM _revised model\DATA_STR-
DE598_revised3\J9050204_2549732141DE598UCA\2549732141\GB04BSC_STR-DE598-
UCA.fm]
UCA.fm]
28
GB
model name1[STR-DE598]
[2--549-732-14(1)]
A
SW:
Lights up when sub woofer selection is
set to “YES” (page 18) and the audio signal is
output from the SUB WOOFER jack.
output from the SUB WOOFER jack.
B
LFE:
Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
Effect) channel and the LFE channel signal is
actually being reproduced.
C
SP A/SP B:
Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
when speaker output is turned off or when
headphones are connected.
D ;
DIGITAL EX:
“; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
E ;
PRO LOGIC IIx:
“; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals or for signals with a
sampling frequency of more than 48 kHz.
for DTS format signals or for signals with a
sampling frequency of more than 48 kHz.
F
DTS-ES 96/24:
“DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 36).
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 36).
G
NEO:6:
Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H
Tuner indicators:
Lights up when using the
Note
“RDS” appears for models of area code CEL,
CEK only.
CEK only.
I
D.RANGE:
Lights up when dynamic range
compression is activated (page 37).
J
COAX:
Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
COAXIAL terminal.
K
OPT:
Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
OPTICAL terminal.
L
SLEEP:
Lights up when sleep timer is
activated.
About the indications in the display
L
C
R
SL
SB
S
SR
LFE
SP A
DIGITAL EX
PRO LOGIC IIx DTS-ES
NEO:6
RDS
D.RANGE
STEREO MONO
SLEEP OPT COAX
96/24
SP B
;
;
MEMORY
SW
9
8
qs
qd
q;
qa
2
1
4
3
5
6
7
GB01COV_STR-DE598-UCA.book Page 28 Friday, March 4, 2005 11:02 AM