Sony str-da5000es, str-da3000es Manual De Usuario
22
GB
1.0 meter to 7.0 meters (3 to 23 feet) in 0.1 meter
(1 foot) steps.
(1 foot) steps.
* For models of area code U, CA, “X feet” is
displayed.
Tip
The receiver lets you to input the speaker position in
terms of distance. However, it is not possible to set the
center speaker further than the front speakers. Also, the
center speaker cannot be set more that 1.5 meters (5
feet) closer than the front speakers.
terms of distance. However, it is not possible to set the
center speaker further than the front speakers. Also, the
center speaker cannot be set more that 1.5 meters (5
feet) closer than the front speakers.
Likewise, the surround speakers can not be set farther
away from the listening position than the front
speakers. And they can be no more than 4.5 meters (15
feet) closer.
away from the listening position than the front
speakers. And they can be no more than 4.5 meters (15
feet) closer.
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
For example, setting the center speaker distance 1–2
meters (3–6 feet) closer than the actual speaker
position will create a fairly realistic sensation of being
“inside” the screen. If you cannot obtain a satisfactory
surround effect because the surround speakers are too
close, setting the surround speaker distance closer
(shorter) than the actual distance will create a larger
sound stage.
meters (3–6 feet) closer than the actual speaker
position will create a fairly realistic sensation of being
“inside” the screen. If you cannot obtain a satisfactory
surround effect because the surround speakers are too
close, setting the surround speaker distance closer
(shorter) than the actual distance will create a larger
sound stage.
Adjusting these parameter while listening to the sound
often results in much better surround sound. Give it a
try!
often results in much better surround sound. Give it a
try!
For advanced speaker setups
Use the CUSTOMIZE menu and set “MENU
EXPAND” to “ON”. This enables advanced
setups including those of the heights of the
surround speakers.
For details on “MENU EXPAND”, see page 42.
For details on how to set the items, see page 44.
EXPAND” to “ON”. This enables advanced
setups including those of the heights of the
surround speakers.
For details on “MENU EXPAND”, see page 42.
For details on how to set the items, see page 44.
Adjust the speaker levels and balance while
listening the test tone from your listening
position. Use the remote for the operation.
For details on the remote operation, refer to the
operating instructions supplied with the remote.
listening the test tone from your listening
position. Use the remote for the operation.
For details on the remote operation, refer to the
operating instructions supplied with the remote.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
centered at 800 Hz.
1
Press
?/1
on the remote to turn on the
receiver.
2
RM-LJ312:
Press < on the remote repeatedly until
RECEIVER menu appears.
Move the easy scroll key to select
“TEST TONE”, then press the key to
enter the selection.
Press < on the remote repeatedly until
RECEIVER menu appears.
Move the easy scroll key to select
“TEST TONE”, then press the key to
enter the selection.
RM-LG112:
Press TEST TONE on the remote.
Press TEST TONE on the remote.
“TEST TONE” in the LEVEL menu
appears in the display and the test tone is
output from each speaker in sequence.
appears in the display and the test tone is
output from each speaker in sequence.
3
Adjust the speaker level and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 40.
see page 40.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME on the receiver.
turn MASTER VOLUME on the receiver.
• You can also use –/+ on the receiver for the
adjustment.
4
RM-LJ312:
After the adjustment, press < on the
remote repeatedly again until
RECEIVER menu appears.
Move the easy scroll key to select
“TEST TONE”, then press the key
repeatedly to select “TEST TONE
[OFF]”.
After the adjustment, press < on the
remote repeatedly again until
RECEIVER menu appears.
Move the easy scroll key to select
“TEST TONE”, then press the key
repeatedly to select “TEST TONE
[OFF]”.
6: Adjusting the speaker
levels and balance
levels and balance
— TEST TONE