Sony trinitron kv-34sl40t Manual De Usuario

**WARNING: Do NOT turn off the power or AC immediately after pressing 

 then 

.  Wait at least 10 seconds

.

NOTE : Test Equipment Required:

1.  Pattern Generator
2.  Frequency Counter
3.  Digital Multimeter
4.  Audio OSC

  

SERVICE MODE PROCEDURE

   1.  Standby mode. (Power off)

2.

 

 

 

 

 

 

 on the

Remote Commander.
 (Press each button within a second.)

  SERVICE  ADJUSTMENT MODE IN

3. The CRT displays the item being adjusted.

4. Press 

 or   on the Remote Commander to select the item.

5. Press 

 or   on the Remote Commander to change the

data.

6. Press 

 then 

 to write into memory**.

  SERVICE  ADJUSTMENT MODE MEMORY

                     

  

Green

7.  Press 

 then 

 on the Remote Commander to

     initialize.

Disp.
(Item)

Item
data

Use Remote Commander (RM-Y167) to perform the following circuit adjustments:

Red

Carry out step 7 when adjusting
IDs 0 to 4 and when replacing
and adjusting IC002.

8.  Turn set off and on to exit.  * CAUTION: Wait at least

10 seconds before turning off set.

1.   After adjustment, pull out the plug from the AC outlet,
       then replace the plug in the AC outlet again.
2.  Turn the power switch ON and set to Service Mode.
3.  Call the adjusted items again to confirm they were adjusted.