Sony VPL-BW5 Manual De Usuario
9
Lo
ca
tion
o
ca
tion
o
f C
o
o
nt
ro
ls
a Ventilation holes (intake)/Air
filter cover
b Adjusters (fore pad)
c Lamp cover
d Adjuster
Adjusts the picture position. (
e S VIDEO INPUT connector (mini
DIN 4-pin)
Connects to the S video output of video
equipment.
equipment.
f VIDEO INPUT connector (phono
type)
Connects to the video output of video
equipment.
equipment.
g INPUT A connector (HD D-sub
15-pin, female)
Inputs a computer signal, video GBR
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
h Rear remote control detector
i HDMI connector
Connects to the video output connector
of the video equipment or the computer
equipped with HDMI/DVI output
connector (digital).
of the video equipment or the computer
equipped with HDMI/DVI output
connector (digital).
j SERVICE RS-232C connector
(D-sub 9-pin, female)
Used for service only.
This is not for customers’ use.
This is not for customers’ use.
k AC IN socket
Connects the supplied AC power cord.
l Adjuster adjustment button
Press to pull out the adjuster. (
m Security bar
An anti-theft chain or wire
(commercially available) can be
connected to this bar.
If it is difficult to pull out, pull out the
security bar using a screwdriver.
(commercially available) can be
connected to this bar.
If it is difficult to pull out, pull out the
security bar using a screwdriver.
qf
Security lock
Connects to an optional security cable
(from Kensington).
Web page address:
http://www.kensington.com/
(from Kensington).
Web page address:
http://www.kensington.com/
To maintain optimal performance, clean the
air filter whenever you replace the lamp. (
air filter whenever you replace the lamp. (
Note
Security bar