Sony wega klv s23a10 Manual De Usuario
Watching the TV
34
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Follow the steps below to program your TV’s remote control to operate the
non-Sony video equipment.
non-Sony video equipment.
Find the three-digit code for your equipment from the “Manufacturer’s
Codes” listed on page 35. If more than one code number is listed, try
entering from the code listed first.
Codes” listed on page 35. If more than one code number is listed, try
entering from the code listed first.
1 Press and hold the
or
FUNCTION
button you want to
program on the remote control and press the
button simultaneously.
The selected
FUNCTION
button (DVD/VCR or SAT/CABLE) will
flash.
2 Enter the three-digit manufacturer’s code number using the --9
buttons while the button is lit, approximately 10 seconds.
3 Press
button.
When the programming is correct, the selected
FUNCTION
button will
flash twice slowly, and when not, flashes five times quickly.
To check if the code works
Aim your TV’s remote control at the equipment, and press the green
POWER
button. If the equipment responds, the programming is completed.
If not, try the next code listed.
Sony Equipment
Programmable Code Number
DVD/VCR
601 (Sony Dream System)
SAT/Cable
801 (Sony Satellite Receiver)
If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically
goes back to the previous setting.
incorrect code number is input, the remote control automatically
goes back to the previous setting.
In some cases, you may not be able to program your remote
control to operate other equipment. In such cases, use the
equipment’s own remote control.
control to operate other equipment. In such cases, use the
equipment’s own remote control.
Dead batteries or removing the batteries may cause the
programmable codes to be lost and revert back to factory settings.
Reprogramming the codes may be necessary.
programmable codes to be lost and revert back to factory settings.
Reprogramming the codes may be necessary.
MUTING DISPLAY
FREEZE
MTS/
SAP
POWER
SAVING
SAVING
TOP MENU MENU
GUIDE
SLEEP
F1
FUNCTION
F2
TV/
VIDEO
POWER
RETURN
SOUND PICTURE WIDE
TV/SAT
MODE
WEGA GATE
1
1
3
2
Insert two size AA batteries
(supplied) by matching the
e and E on the batteries to
the diagram inside the
remote control’s battery
compartment.
(supplied) by matching the
e and E on the batteries to
the diagram inside the
remote control’s battery
compartment.
DISPLAY