Denon avr-2807 0024 vers check Manuales De Servicio
Page 1 / 1
Confirming the firmware’s number after upgraded
After completion of the updating operation, the new version number can be confirmed by
starting up the AVR-2807 according to the following procedure.
With the following operation, the AVR-2807 can be set to the Flash-ROM
Version-Number Confirmation Mode.
Turn the power of the AVR-2807 on, while holding both “STATUS” button and
“ROOM EQ” button on the front panel simultaneously.
starting up the AVR-2807 according to the following procedure.
With the following operation, the AVR-2807 can be set to the Flash-ROM
Version-Number Confirmation Mode.
Turn the power of the AVR-2807 on, while holding both “STATUS” button and
“ROOM EQ” button on the front panel simultaneously.
Every time the “STATUS” Button is pressed, version numbers of the MAIN, SUB,
etc. are indicated on the front panel section in the following order.
etc. are indicated on the front panel section in the following order.
Depression
Button
Name
Remarks
1 STATUS
MODEL
AVR
2
STATUS
MAIN
00.63
3 STATUS
SUB
00.32
4 STATUS
DSP
27.04
STATUS
ROOM EQ
Turn
Power ON
+
+