Denon dfw v0038 avr avc-1610 avr-590 rev.1.0.6 manual en Manuales De Servicio
The Operating Manual for updating of DENON A/V receiver/amplifier firmware Page 5 / 5
1.4 Install the D&M Firmware Writer.
1) Please
install
“DFW_0038_AVR_AVC1610_AVR590_(Rev.1.0.6).exe”
to any folder of your PC.
2) Please make shortcut icon on your PC.
2 Procedure of updating for firmware
2.1 Notice
Please keep the following notice for firmware update.
a) Keep the PC environment refer to 1.1.
b) Avoid the communication cable from the electrical noise source.
(E.g. telephone cable, AC line, a fluorescent light)
c) Don’t remove cable during update.
d) Don’t turn off the power during update.
e) Don’t run other PC application during update.
f) Stop the resident program on PC.
g) Stop the screen saver ability on PC.
h) Stop the power save ability on PC.
i) In case of laptop PC, Use the AC adaptor.
2.2 Procedure of updating for firmware
2.2.1
Please initialize the unit.
1) Turn on the power of unit while pressing the
SURROUND MODE [<]
button and
SURROUND MODE [>]
button simultaneously.
2) When FL Display will be indicated perfectly, please remove the
SURROUND MODE [<]
button and
SURROUND MODE [>]
button.
2.2.2
Turn on the AV receiver/amplifier.
Operate the following. Turn on the AV receiver.
1) Turn on the power switch while simultaneously pushing the
SURROUND MODE [<]
button
and the
[MENU]
button of the front panel.
2) Confirm the power indicator is red and "WRITING" is displayed in the front panel.
DFW_0038_AVR_
AVC1610_AVR590
_(Rev.1.0.6).exe