Nokia 5140 Manuales De Servicio
![Nokia](https://files.manualsbrain.com/attachments/dce7461e47de2eca5f7d09be31ff1fc55db75997/common/fit/150/50/3540f9922a492527aa17737eb6cc8428f11e9c5169db0829a90bcdf9088f/brand_logo.jpeg)
NPL-4/5
System Module and User Interface
Nokia Customer Care
Page 10
Copyright © 2004 Nokia Corporation. All rights reserved.
Issue 1 05/04
Introduction
Electrical modules
The system module consists of Radio Frequency (RF) and baseband (BB). User Interface
(UI) contains display, keyboard, IR link, vibra, HF/HS connector and audio parts.
(UI) contains display, keyboard, IR link, vibra, HF/HS connector and audio parts.
FM radio is located on the main PWB.
The electrical part of the keyboard is located in separate UI PWB. It is connected to radio
PWB through spring connectors.
PWB through spring connectors.
The Baseband blocks provide the MCU, DSP, external memory interface and digital con-
trol functions in the UPP ASIC. Power supply circuitry, charging, audio processing and RF
control hard ware are in the UEMEK ASIC.
trol functions in the UPP ASIC. Power supply circuitry, charging, audio processing and RF
control hard ware are in the UEMEK ASIC.
The purpose of the RF block is to receive and demodulate the radio frequency signal from
the base station and to transmit a modulated RF signal to the base station.
the base station and to transmit a modulated RF signal to the base station.
The UI module is described in a dedicated section of the manual.
Interconnection diagram
Figure 1: Interconnection diagram
IHF
speaker
Tomahawk
Accessories
Keyboard
module
Microphone
IR Link
Earpiece
Antenna
Charger
Battery
SIM
Display
Module
NHL-4
Radio
NPL-4/5
Flashlight