Nokia 5140 Manuales De Servicio

NPL-4/5

Company confidential 

Troubleshooting Instructions

Nokia Customer Care

Page 36

Copyright © 2004 Nokia Corporation. All rights reserved.

Issue 1 05/04

EDGE:->ON

Tx data type->Alternate

TX PA mode:->High

TX Power level:->10

The setup should now look like this:

Now the measurement equipment should detect the following output signal of the 
phone:

P

out

  =  +24 dBm @ 897.4 MHz

If this is not the case, then go to the chapter 

EDGE for the troubleshooting.

In the following, it is assumed that the TXP signal is used as trigger-signal.  For that a 
TXP test point is provided.