Panasonic 42hl57 Manual De Usuario
17
HL57 (E/F) Web 213:276
Chapter 3: Using the remote control
Preparing the remote control
for use
for use
Your TV remote control can operate your TV and many other
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater in a box), even
if they are different brands.
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater in a box), even
if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most
Toshiba devices (- page 21).
Toshiba devices (- page 21).
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
that the remote control is not preprogrammed to
operate:
You can program the TV remote control so it will operate the
other device (- pages 19–23).
other device (- pages 19–23).
Installing the remote control
batteries
batteries
1
Remove the battery cover from the back of the remote
control.
control.
2
Install two “AAA” size batteries, making sure to match
the + and – signs on the batteries to the signs on the battery
compartment.
the + and – signs on the batteries to the signs on the battery
compartment.
3
Reinsert the battery cover in the remote control until the
tab snaps.
tab snaps.
Caution: Never throw batteries into a fire.
Note:
• Be sure to use AAA size batteries.
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
battery types or use new and used batteries in combination.
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control directly at
the TV and make sure there is no obstruction between the
remote control and the TV.
the TV and make sure there is no obstruction between the
remote control and the TV.
Squeeze tab
and lift cover.
and lift cover.
16.4 ft (5m)
Point remote control
toward remote sensor
on front of TV.
toward remote sensor
on front of TV.
26323742HL57_EN.book Page 17 Wednesday, March 14, 2007 4:28 PM