Panasonic cu-ks30nkua Manual De Usuario

•  The set temperature is 4°F(2°C) below the detected room 

temperature in the case of cooling operation.

(GREEN) (Lamp 

Off)

To operate the system, press the OPERATION button, 

which is also used as the receiver, below the unit display. 

Each time this button is pressed, the OPERATION lamp 

changes color to indicate the type of operation. Select the 
desired type of operation.

  During DRY operation, the system adjusts the room 

temperature and fan speed according to the conditions in the 
room, in order to maintain a comfortable room environment.

 • 

 

DRY operation is as shown in the figure below.

  The compressor operation frequency varies.
  The indoor fan operates with 1/f fluctuation.

  The compressor operates at a low operating frequency.
  The indoor fan operates with 1/f fluctuation.

  When room temperature rises above the set temperature, the 

compressor turns ON. When room temperature falls below the 
set temperature, the compressor turns OFF. 

  The Sensor Dry operation during the Low Ambient Cooling 

Mode (outside air temperature : 59°F(15°C) or lower) is as 
follows.

•  Monitoring operation takes place when the room temperature 

is below 59°F

(

15°C), or more than 5°F

(

3°C) below the set 

temperature.

•  When the monitoring range is entered, the compressor stops, 

and the indoor fan operates with 1/f fluctuation.

Conditions are monitored at all 
times when the room temperature 
is below 59

°

F(15

°

C).

Load

COOL zone

A zone

B zone