Panasonic dmr-e100heb Manual De Usuario

Descargar
Página de 76
∫ Before Use
13
Follow the step-by-step guide below.
[1] Connect the aerial to the RF Input
 
socket of the DVD Recorder.
[2] Connect the RF lead from the RF 
Output socket of the DVD Recorder to 
the TV aerial input socket.
[3] Connect the AV1 21-pin scart socket to 
TV scart socket (optional).
≥This is necessary for Download from TV with Q Link function.
≥If you use Panasonic TV with RGB output capability and want to 
receive RGB signals, connect this unit to the AV1 socket on the TV.
[4] Connect the AV2 21-pin scart socket to 
the DVD Recorder Scart Socket on 
your Satellite Receiver/Digital Sat 
receiver.
≥If you are not connecting a Satellite Receiver, skip this step.
[5] Connect the TV scart socket of your 
Satellite Receiver to the AV1 scart 
socket of your TV (optional).
≥If you are not 
connecting a Satellite 
Receiver, skip this step.
[6] Plug the TV, 
DVD Recorder and Satellite Receiver 
into the mains as shown at top of the 
page.
Hints:
≥Q Link offers a range of convenient functions. For example, 
downloading of the tuning positions of all available TV stations 
into your unit’s memory if you connect the unit to your TV with a 
fully wired 21-pin Scart cable (not supplied). Features similar to Q 
Link have different names and may not work the same.
[Q Link] is a registered trademark of Panasonic.
[DATA LOGIC] is a registered trademark of Metz.
[Easy Link] is a registered trademark of Philips.
[Megalogic] is a registered trademark of Grundig.
[SMARTLINK] is a registered trademark of Sony.
For details, refer to your TV’s operating instructions or consult your 
dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21 
pins of one plug on a fully wired 21-pin Scart cable are connected 
to the matching pins on the other end of the cable.
Reference:
≥If the TV set is equipped with a 21-pin scart socket that features 
Y/C signal separation, set the “AV1 Output” to “S-Video” 
(see page 61) so that you can play back with high picture quality 
and use a fully-wired 21-pin Scart lead (not supplied) to connect 
the DVD Recorder to the TV.
Connections (with Scart leads)
1
2
3
4
5
6
6
6
Aerial
(not supplied)
Aerial Input  
socket
TV [with or without Q link function] 
(not supplied)
To AC Mains socket
AV2 socket
AV1 socket
RF lead 
(supplied)
Necessary for  
TV with Q Link
Necessary for Connecting  
a Satellite Receiver
21-pin Scart socket (DVD)
21-pin Scart socket (TV)
To AC Mains socket
Satellite Receiver (not supplied)
AC Mains lead (supplied)
AC Input socket
AV2 21-pin Scart socket
AV1 21-pin Scart socket
RF Output socket
RF Input socket
Note:
21-pin Scart leads are not supplied.
This unit
RF IN
This unit
TV
RF OUT
This unit
TV
AV1 (TV)
This unit
Satellite Receiver
AV2(DECODER/EXT)
TV
Satellite Receiver
DVD(B).book  13 ページ  2003年8月5日 火曜日 午後3時30分