Panasonic dmr-e100 Manual De Usuario

Descargar
Página de 37
∫ Helpful Hints
72
Recording, timer recording and dubbing
Page
Still pictures
Cannot record.
≥You haven’t inserted a disc or the inserted disc is not compatible. Insert a disc the unit 
can record onto.
≥The disc is unformatted.
Format the disc so this unit can record on it.
≥The write protect tab on the cartridge is set to “PROTECT”.
Use a ballpoint pen or similar to release the write protection.
≥Recording is not possible unless you set “Disc Protection” in DISC INFORMATION” to 
“Off”.
≥HDD or the disc is full or nearly full.
Delete unneeded programmes or use another disc.
≥The material you are trying to record is copy-guarded.
≥Tried to record to a DVD-R that has already been finalized.
≥Timer recording will not be activated when in editing or dubbing. Timer recording will 
begin after the editing/dubbing is finished.
≥If you repeat recording or editing 200 times or more, the remaining capacity of the DVD-R 
is reduced and then the recording or editing may be disabled.
9
38
69
37


VIDEO Plus+ programming does 
not work properly.
≥The clock is wrong.
Go to “Settings” in the “SETUP” menus and correct the clock with “Clock”.
Timer recording does not work 
properly.
≥The timer programme is incorrect.
Correct the programme and check them when you are finished.
≥The unit is not on standby for timer recording. (“
” on the unit’s display is not on.)
≥Different timer programme times overlap.
≥The clock is wrong.
Go to “Settings” in the “SETUP” menus and correct the clock with “Clock”.
≥Timer recording will not be activated during formatting, dubbing, editing of still pictures 
and other such operations which are not suitable for interruption when they are being 
carried out.
30, 32
3263
The unit switches to standby while 
making a timer recording.
≥The unit switches to standby while making a timer recording if the disc runs out of space.
Use a disc that has enough space to record the programme.
The timer programme remains even 
after recording finishes.
≥The programme remains if you select weekly or daily setting.
30, 32
The available recording time 
doesn’t increase even after erasing 
all recordings on the disc.
≥The available recording time does not increase if you erase data written by the DVD-RAM 
drive of a computer.
Format the disc if necessary.
≥If the disc is dirty, wipe with the DVD-RAM/PD lens cleaner (optional) before formatting.
≥Available recording space on the DVD-R does not increase even after erasing previously 
recorded programming.
38

A part or whole of a recorded 
programme has been lost.
≥If the power breaks down or the plug is disconnected from the household AC outlet while 
recording or editing, the programme may be lost or the disc may become unusable.
)We cannot offer any guarantee regarding lost programmes or discs. You will have to 
format the HDD/disc or use a new disc.
It takes too much time when 
dubbing to DVD-R in High Speed 
mode.
≥It takes more time to dub many files or files including LPCM than usual.
≥The disc is not compatible with high speed recording.
35
Cannot dub to DVD-R in High 
Speed mode.
“DVD-R Rec for High Speed mode” is not set to “On”.
≥Dubbing to DVD-R in High Speed mode is possible only when the DVD-R is compatible 
with dubbing in high speed.
The birl of DVD-R is loud.
≥When recording to DVD-R or dubbing in High Speed mode, the birl of the disc may be 
louder than usual.
Can we dub DVD-R with 
t24 
speed?
≥When the programme is recorded in EP mode, and it is dubbed in High Speed mode on 
DVD-R which is compatible with high speed recording, the dubbing speed is 24 times 
faster than usual (e.g. When the recording is 6 hours long, it is dubbed in 15 minutes.).
The contents of the card cannot be 
read.
≥The memory card format is not valid with the unit.
)Format using FAT 12 or FAT 16 with other equipment or format the memory card with this unit. 
(Mobile hard disk is also FAT 32 compatible.)
≥The unit tried to display still picture files that were in a folder level that is not valid.
≥The still picture file is not JPEG or TIFF.
)This unit displays still pictures (JPEG and TIFF) that comply with DCF standard.
≥Turn off and then turn on the unit again.
Copying, erasing and setting 
protection takes a long time.
≥When there are a lot of folders and files, it may sometimes take a few hours.
≥When repeating copying or erasing, it may sometimes take a long time. Format the disc or memory 
card.
The tray won’t open/close.
≥The tray cannot be opened or closed while playing back the still pictures or displaying the editing 
screen. Press [RETURN] for a while to clear the screen.
The PC card cannot be removed.
≥Make sure the PC card has been slotted home firmly before attempting to remove.
Timer recording began in the 
middle of editing a still picture.
≥If it comes to the time scheduled for timer recording, the recording may start even though you are 
editing.
Discs make sounds as they rotate. This does not mean a malfunction.
DVD(B).book  72 ページ  2003年8月5日 火曜日 午後3時30分