Panasonic dmr-e75veb Manual De Usuario
Helpful Hints
70
Operation
Page
On the TV
Page
On the unit’s display
Page
Error messages
∫ Common
X HOLD
≥The Child Lock function is activated.
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD”
disappears.
disappears.
66
∫ DVD
Cannot finish recording completely.
≥The programme was copy-guarded.
≥The disc may be full.
≥The disc may be full.
–
Cannot record on the disc.
Please check the disc.
Unable to format.
Please check the disc.
Unable to format.
≥The disc may be dirty or scratched.
21
Cannot record. Disc is full.
≥Create space by erasing any unnecessary titles. [RAM]
≥Use a new disc. [RAM] [DVD-R]
≥Use a new disc. [RAM] [DVD-R]
33, 35
–
Cannot record. Maximum number of titles
recorded.
recorded.
Error has occurred. Please press ENTER.
Timer Recording standby or Ext Link
standby will be canceled.
Timer Recording standby or Ext Link
standby will be canceled.
≥Press [ENTER] to start recovery process. You cannot operate the unit while it is
recovering (“SLF CHECK” appears on the unit’s display).
–
No Disc
≥The disc is upside down.
21
Please change the disc.
≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit
to remove it and check it for scratches or dirt. (The unit turns off automatically
after you open the tray.)
after you open the tray.)
21
This is a non-recordable disc. Cannot record.
≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized
DVD-R.
≥You inserted an unformatted DVD-RAM. Format the disc with this unit.
19
33
This disc is not properly formatted.
Formatting is necessary using DISC
MANAGEMENT.
Formatting is necessary using DISC
MANAGEMENT.
≥The operation is prohibited by the unit or disc.
–
HARD ERR
≥If there is no change after turning the unit on and off, consult the dealer where the
unit was purchased.
–
NO READ
≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥You have used a DVD-RAM/PD lens cleaner and it has finished.
≥You have used a DVD-RAM/PD lens cleaner and it has finished.
Press [
< OPEN/CLOSE] on the main unit to eject the disc.
21
–
PROG FULL
≥There are already 16 timer programmes. Erase unnecessary timer programmes.
31, 59
REMOTE MODE
∑
(“
∑” stands for a number.)
≥The remote control and main unit are using different codes. Change the code on
the remote control.
Press and hold [ENTER] and the
indicated number button at the same
time for more than 2 seconds.
indicated number button at the same
time for more than 2 seconds.
9
SLF CHECK
≥The unit is starting up. Wait until the message disappears.
–
U59
≥The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
–
U99
≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to
standby. Now press [
Í/I] again to turn the unit on.
–
UNSUPPORT
≥You have inserted a disc the unit cannot play or record on.
19
VHS
DVD
EB.book 70 ページ 2004年4月13日 火曜日 午前9時7分