Panasonic kx-fp141e Manual De Usuario
4. Fax
28
4.3 Sending a fax using
the navigator directory
the navigator directory
Before using this feature, program the desired
names and telephone numbers into the
navigator directory (page 21).
names and telephone numbers into the
navigator directory (page 21).
L
Keep the front cover page open for button
locations.
locations.
1
Adjust the width of the document guides to fit
the actual size of the document.
the actual size of the document.
2
Insert the document (up to 10 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
DOWN until a single beep is heard and the
unit grasps the document.
L
If the document guides are not adjusted
to fit the document, re-adjust them.
to fit the document, re-adjust them.
3
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 26).
select the desired resolution (page 26).
4
Press {>}.
5
Press {A} or {B} repeatedly to display the
desired item and press {FAX/START}.
desired item and press {FAX/START}.
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 5
times.
will automatically redial the number up to 5
times.
L
To cancel redialling, press {STOP}.
If your unit does not send a fax
L
Confirm that you have entered the number
correctly, and that the number is a fax
number.
correctly, and that the number is a fax
number.
L
The connecting tone will be heard after
dialling to tell you the status of the other
party’s machine (feature #76, page 49).
dialling to tell you the status of the other
party’s machine (feature #76, page 49).
4.4 Broadcast
transmission
transmission
By programming items from the navigator
directory (page 21) into the broadcast memory,
you can send the same document to multiple
parties (up to 20). Your programmed items will
remain in the broadcast memory, allowing
frequent re-use. See page 29 for broadcast
transmission instructions.
directory (page 21) into the broadcast memory,
you can send the same document to multiple
parties (up to 20). Your programmed items will
remain in the broadcast memory, allowing
frequent re-use. See page 29 for broadcast
transmission instructions.
L
Keep the front cover page open for button
locations.
locations.
4.4.1 Programming items into
the broadcast memory
the broadcast memory
1
Press {MENU} repeatedly to display
“DIRECTORY SET”.
“DIRECTORY SET”.
2
Press {#}.
L
The number in brackets indicates the
number of registered items.
number of registered items.
3
Press {A} or {B} repeatedly to display the
desired item.
desired item.
4
Press {SET}.
L
To program other items, repeat steps 3
and 4 (up to 20 items).
and 4 (up to 20 items).
5
Press {SET}.
Note:
L
If you program the wrong item, press {STOP}
after step 4 to erase the item.
after step 4 to erase the item.
L
Confirm the stored items by printing a
broadcast programming list (page 65).
broadcast programming list (page 65).
4.4.2 Adding a new item into the
broadcast memory
broadcast memory
After initial programming, you can add new items
(up to a combined total of 20).
(up to a combined total of 20).
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“<BROADCAST>”.
“<BROADCAST>”.
3
Press {MENU}.
4
Press {*}.
5
Press {A} or {B} repeatedly to display the
desired item you want to add.
desired item you want to add.
6
Press {SET}.
L
To add other items, repeat steps 5 and 6
(up to 20 items).
(up to 20 items).
7
Press {STOP}.
FP141-145E.book Page 28 Wednesday, August 20, 2003 11:00 AM