Panasonic KX-P7105 Manual De Usuario

:Indicator is turned off.

:Indicator is blinking.

Close the front cover.

Load media in the media tray.

Remove the jammed media, then
open the front cover and close it.

Press the PRINT/RESET button
(less than 5 seconds).

Turn the power off for a few seconds
then on again. If the error continues,
call for service.

Replace the toner cartridge soon.

Replace the drum unit soon.

Install the drum unit.

Replace the toner cartridge now.

Replace the drum unit now.

To avoid machine malfunction, do not use the equipment under the following conditions:

■ 

To prevent static electricity damage to any of the following
components, touch a grounded metal surface, such as the
printer’s bare metal frame prior to touching the component.

• The interface connectors: parallel and USB
• Electrical components, connectors inside the printer

■ 

Always use a shielded interface cable.

Use of an unshielded cable can result in radio interference with
data.

■ 

Do not use a line conditioner, transient suppressor or surge
protector as it may cause a machine error.

■ 

The ventilation space needed is more than 20 mm (0.8˝) between
the printer and a wall.

For detailed information, refer to the “Maintenance and Specifications” section of the Operating
Instructions installed on your computer.

ERROR

TONER/
DRUM UNIT

Front cover is open.

Media tray is empty.

Media jam has occurred.

RAM overflow or overrun has occurred.

Internal error has occurred.

Toner is low.

Drum unit is wearing out.

Drum unit is not installed.

Toner is empty.

Drum unit is worn out.

:Indicator is lit.

Use of supplies other than genuine Panasonic supplies can damage
the printer. This will void the warranty of the printer and supplies.

Panasonic Digital Imaging Solutions Company 
Business Unit of Matsushita Electric Corporation of America
Two Panasonic Way, Secaucus, New Jersey 07094

To locate your nearest sales dealer

CALL 1-800-742-8086

To order consumables

CALL 1-800-833-9626

For technical support

CALL 1-800-726-2797

Panasonic Sales Company (PSC)
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infatería, Km. 9.5, San Gabriel Industrial Park
Carolina, Puerto Rico 00985

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
http://www.panasonic.ca

Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/

World Wide Web Support:
http://www.kme.panasonic.co.jp/saga/english/index.htm

ERROR

TONER/
DRUM UNIT

TONER/
DRUM UNIT

TONER/
DRUM UNIT

READY

ERROR

READY

ERROR

READY

READY

*

1

The indication varies depending on the printer status.

*

1

KX-PEM12

16 MB RAM board

KX-PEM13

32 MB RAM board

KX-PPSU5

Upgrade kit (for PostScript)

KX-PMF3

2nd feeder

Returning this product is expensive and time consuming for you,
your retailer and for us, the manufacturer. Should you encounter
any problems with your new product, please refer to the Operating
Instructions.

If you still need assistance, call our toll free "HELP" line at:

please call:

Not genuine toner

• 

Insert a stack of media into 

   the manual feed. (Insert a 
   media one by one.)

• 

Media for ink jet

   (paper, transparency, etc.) or
   transparency for color laser
   printer; it may be wrapped
   around the fuser roller and
   cause damage.

• 

Any toner other than genuine

   Panasonic toner; it may 
   damage the printer.

• 

Unstable or unlevel surfaces.

• 

Directly in front of air 

   conditioning vents.

• 

Liquids near the equipment.

• 

Areas of poor ventilation.

• 

Areas of high dust or chemical 

   fume concentration. 
   (solvent etc.)

• 

Direct exposure to sunlight.

• 

Extremely high or low 

   temperature [temperature
   range: 10

°

C to 32.5

°

C 

   (50

°

F to 90.5

°

F)]

• 

Extremely high or low humidity.

   (humidity range: 20% to 80% 
   RH)

• 

Condensation due to rapid 

   change of temperature.